# How Much To Order

If you have any questions, just email us at info@hyggeandwest.com with your wall dimensions (height and width) of each wall you'd like to cover with wallpaper or tiles and we'd be happy to figure out how many rolls or tiles you'll need.

**Wallpaper**

Our rolls are considered DOUBLE rolls, which means that each double roll is 30 feet long (rather than single rolls which are 15 feet long). If you need two double rolls, for example, just order two of our rolls. If you need two single rolls, order just one of our rolls.

**How to Determine the Number of Wallpaper Rolls You Need**

- Measure your walls - make sure you have an accurate measurement in inches of height and width of the portion of the wall you'll be covering. Sometimes it helps to draw a rough sketch to use while you do your calculations.
- Determine the number of strips you'll need - Our wallpapers are all 27" wide. Once you have the width of your wall in inches, take the width and divide by 27. This will give you the number of strips of wallpaper that you will need. Remember to always round up!
- Determine how many strips you can get out of a roll - This can be the tricky part as it depends on the repeat of your wallpaper. The repeats on our wallpapers vary between 18" to 36", so be sure to check the product measurements. 1. To determine the approximate number of repeats per roll, divide 360 (30' rolls times 12") by the repeat of your wallpaper. 2. Take the height of your wall in inches and divide by the repeat - this will give you the number of repeats you need in each strip. 3. Then divide the number of repeats per roll by the number of repeats you need per strip which will give you the number of strips you'll be able to get out of each roll.
- Last, just take the number of strips you'll need from Step 2 and divide by the number of strips you can get out of a roll. Again, always round up!

**How to Determine the Number of Wallpaper Tiles You Need**

- Measure your walls - make sure you have an accurate measurement in inches of height and width of the portion of the wall you'll be covering. Sometimes it helps to draw a rough sketch to use while you do your calculations. (insert image of rough sketch - will send an example)
- Determine the number of tiles you'll need across – Our tiles are all 24" wide. Once you have the width of your wall in inches, take the width and divide by 24. This will give you the number of tiles that you will need. Remember to always round up!
- Determine how many tiles you need vertically. The height of our tiles vary between 24" to 32", so be sure to check the product measurements. Take the height of your wall in inches and divide by the height of your tile - this will give you the number of tiles you’ll need to cover the height of your wall. Again, be sure to round up!
- Last, take the number of tiles you need across and multiply by the number of tiles you need vertically. One more time - always round up!